Description
- Block the trigger signal to a radio controlled improvised explosive device without touching it
- Bridge the gap between a First Response and arrival of the Bomb Disposal Team
- Maintain radio communications between response teams in and around the safety cordon
- Preserve operation of public cell phone networks.
NSN No: 1385-99-725-4183
The REBUS jammer system is a low power RF inhibitor connected to an antenna in an RF shielded blast bin
The inhibition is contained inside the blast bin and focussed exclusively against the RCIED. The power of the REBUS jammer is held inside the bin by a layer of electromagnetic screening fabric. This shield contains the inhibition, so that all the power is employed against defeating the power of the remote transmission signal used to initiate the radio controlled improvised explosive device (RCIED)
Stops RCIED receiving a trigger signal. The inhibitor jams the reception of a trigger signal by the (RCIED). The RF shielding of the bin also blocks and filters the incoming trigger signal.
Allows security teams to use their radio communications close by. Communications devices used by the Response teams working in and around the safety cordon are not affected by the inhibitor even when they are in close proximity. The electromagnetic screening material in the bin is a two-way barrier, filtering incoming signals and containing the electronic counter measures (ECM) signal inside the bin.
Does not interfere with critical radio communications like airbands. The range of the REBUS jammer is limited to the area in the blast bin so it does not affect any other radio signals in any part of the radio spectrum.
No need to shut down cell phone networks. There is no need to shut down a cellphone network because the REBUS jammer system prevents just one pair of cellphones from connecting (the transmitter used by the terrorist to activate the IED and the receiver which is part of the IED).
The REBUS low power RF inhibitor:
Overcomes all threats in a single box. The inhibitor simultaneously covers all threats in the frequency range 20MHz – 2.4GHz including GSM and 3G mobile phones, popular VHF PMRs and UHF PMRs (hand-held radios and walkietalkies), and Wi-Fi. No programming or training required
Low power efficiency. Because it is in position right next to the device, the inhibitor only needs a low power signal source to overpower a much stronger trigger signal transmitted from a distance. In tests, the inhibitor repeatedly killed high-power PMR signals at unrealistically close proximity.
Simple to use. The inhibitor is very simple to operate and its status can be observed from a distance.
ECM time delay start. The inhibitor slowly increases the RF power over a 60 second period, giving the operator time to walk away from the device in safety.
Up to 8 hours run time. The inhibitor’s internal rechargeable batteries will run for 4+ hours, and can be supplemented by an external battery pack to provide a further 4+ hours of run time.
Blast Protection. The RF sheilded bin also offers blast protection, containing up to 500g / 18oz PE
